technical data sheet rpc-2.92 adaptor rpc-2.92 plug C mini-coax 40 ghz jack 02S123-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtl ich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 61169-35 mechanically compatible with rpc-3.50 and sma mini-coax according to rosenberger mini-coax documents n/a material and plating connector parts material plating center contact cube gold, min. 1.27 m, over chemic al nickel outer contact stainless steel passivated coupling nut stainless steel passivated dielectric 1 ps dielectric 2 ptfe gasket rpc-2.92 silicone
technical data sheet rpc-2.92 adaptor rpc-2.92 plug C mini-coax 40 ghz jack 02S123-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtl ich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 f(ghz) electrical data impedance 50 w frequency dc to 40 ghz return loss 3 26 db, dc to 18 ghz 3 21 db, 18 ghz to 26.5 ghz 3 15 db, 26.5 ghz to 40 ghz insertion loss 0.04 x db insulation resistance 3 5 g w center contact resistance rpc-2.92 3.0 m w outer contact resistance rpc-2.92 2.0 m w center contact resistance mini-coax 10.0 m w outer contact resistance mini-coax 3.0 m w test voltage 750 v rms working voltage 250 v rms rf-leakage 3 80 db @ dc to 1 ghz 3 60 db @ 1ghz to 4 ghz mechanical data mating cycles 3 500 center contact captivation 3 20 n coupling test torque rpc-2.92 1.70 nm recommended torque rpc-2.92 0.80 nm to 1.10 nm mini-coax engagement and disengagement force 1 n to 4 n environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a weight weight 7.6 g/pce draft date approved date rev. engineering change number name date martin moder 25/05/16 herbert babinger 10/01/17 200 16-2008 m.ruf 10/01/17 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
